Components i skip to install-lost alarm buzzer/side acrylic plate/led, will fly for about 10 packs then i'll decide to put the rest of the components. Flies good out of the box-just put in my rate. came with BF3.5.2 Same FC with the Skystars Stx225 ( follow build guide from Andy RC's you tube channel) easy connection, im on crossfire nano hook it up at tx3/rx3. smart audio on tx6, bolt that goes into the standoff i changed to abit longer for extra grip. overall frame quite stiff, dont know if it hold up on crashes ( well, i never plan to crash anyway). Im happy for quality considering the cheaper price. cruising with runcam 3s about 5mins steady flight (not aggresive on 4S lipo only). i switch to other hole for camera mounting screw because i dont want the lens to protrude out yet to change to GoPro lens (longer). i use my own rubber standoffs for vibration dampening.
The receiver ports are illustrated in the photo. SBUS goes to the sbus pin and works out of the box. If you have a Flysky ibus receiver with the normal non inverted output you need to connect it to rx1 or swap the solder ball.
All the motors come up and the VTX is good but gets quite hot.
You should move the pagoda to the top of platform instead of hanging out the bottom.
The buzzer is good but resetting it with the button every time is a pain. Maybe someone knows if there is a way to reset it with dis-arm?
This 7 inch copter fly's good the way it comes, there are a few things I will change, part the FC isn't soft mounted(it has no oscillations yet), the fpv antenna and needs better placement, rather just a bit longer to get above the battery, and last if you use turtle mode you need to protect you esc's, it has a lot of torque,and will hit them.
The props are quieter than you would guess. I fly it in a park and people don't mind.
Everything is as expected, although you will need to figure out how to attach the receiver yourself and change the VTx power settings. There are some videos online.
/
USD 
