すべて
製品のキーワード
メールアドレスアカウントを入力してください
Creality 3D CR-10 3Dプリンター
共有先:

Creality 3D CR-10 3Dプリンター

- 青 EUプラグ
212296802

デスクトップDIYマシン
4.74 347 カスタマーレビュー | 英語の説明を参照してください
434.31
アプリを使用するために、余分な を保存します

QRコードをスキャンして購入します。

  • 1. Google PlayまたはApp Storeで無料アプリをダウンロードします。
  • 2.アプリを起動し、QRコードをスキャンして直接購入します。

以下の手順に従ってください:

  • 1. Gearbest.comへのサインイン
  • 2.のマークが付いた製品をカートに追加します。
  • 3.アプリを開き、カートに移動します。
  • 4.即時割引のためにご注文をお支払いください!
  • 送料無料
    COD この商品は代金引換で配送をサポートしています。 提案:代金引換払い以外の商品を注文しないでください。代金引換払い方法を選択できない場合があります。
    間の出荷: Feb 03 - Feb 05, 発送予定日: 営業日 注文処理には数日かかる場合があります。 倉庫から発送されると、配送(または配送)時間は配送方法によって異なります。
  • +
  • 無利子 「最大 0 無利子で楽しむことができます 分割払いで、このオファーを享受できない場合があります 他の製品で注文する」
税務情報 価格保護 価格免責事項 修理を保証します レポートアイテム
クリアランス
あなたにおすすめの関連製品
買い物客も

Creality CR - 10 Youtubeビデオレビュー

Creality CR - 10 に関する説明

免責事項:

●3Dプリンターの組み立てまたは操作を行う前に、ユーザーマニュアルをよく読んでそれに従ってください。

●3Dプリンターの変更およびカスタマイズは固く禁じられています。変更に起因する問題については責任を負いません。

●地域に合った正しいAC電圧を常に使用してください。

●3Dプリンターを可燃性/可燃性の材料、または熱源の近くに置かないでください。

●3Dプリンターは、適切に換気された場所でのみ使用してください。プリンターから安全な距離を維持してください。



CR-SDカードのオフライン印刷機能を備えた10 3D大型デスクトップDIYプリンターLCDスクリーンディスプレイ


説明:

CR-10 3Dデスクトッププリンターは、インポートされた特別なアルミニウムフレームを備えた3Dプリンターです。超大型の300 x 300 x 400mmのビルドボリューム、標準の0.4mmノズル径(0.3 / 0.2mmに交換可能)を特長としています。ガレージで作られた感触と手作りの魅力を維持するために、CR-10 3Dデスクトッププリンターはビルドユアセルフキットでもあり、3Dプリンターの忘れられないステップバイステップの学習体験を提供します!


主な特徴:

●オフラインで簡単に使用できるLCDスクリーンとキーパッド付き

●SDカードのオフライン印刷をサポートし、USBアダプターで直接印刷することもできます

●あなたにぴったりの300 x 300 x 400mmのビルドボリューム

●複数の3D印刷フィラメントをサポート:ABS / PLA / TPUなど

●さらに簡素化された構造は、迅速な組み立てと簡単な調整を意味し、時間とエネルギーの両方を節約します

●安定性と信頼性の向上:アルミニウム板により、より安定した印刷が保証されます

●組み立ては簡単で、DIYのお客様に適しています

●これは組み立てられていないDIYキットであり、3Dプリンタの最初から忘れられないステップバイステップの学習体験を提供します。創造性への情熱がある限り、この製品を見逃すわけにはいかない

●ノズル温度:通常の状態で250 Deg.C未満、最大270 Deg.C

●フィラメント検出機能を解除し、電源オフ状態が復元されたときに印刷を続行する機能(アップグレード版のみ)

●注:ここをクリックして別の色を選択できます


ドライバーのダウンロード:ここをクリック


明細事項

明細事項

ブランド: 創造性
モデル: CR - 10
特殊機能: DIY
ノズル直径: 0.4ミリメートル
メモリカードのオフライン印刷: SDカード
液晶スクリーン: サポートする
印刷速度: 150mm / s
材料の直径: 1.75ミリメートル
ファイル形式: Gコード,JPG,OBJ,STL
コンピュータソフトウェアをホスティング: クーラ
製品重量: 組み立てられていないパッキング

規格

製品重量: 13.8000 kg
製品サイズ(長さx幅x高さ) : 65.00 x 54.00 x 29.00 cm / 25.59 x 21.26 x 11.42インチ
パッケージサイズ(長さx幅x高さ): 66.00 x 55.00 x 30.00 cm / 25.98 x 21.65 x 11.81インチ

パッケージ内容

コンテンツのパック: 1 x CR - 10 3DデスクトップDIYプリンタキット
Creality 3D CR-10 3Dプリンター- 青 EUプラグCreality 3D CR-10 3Dプリンター- 青 EUプラグCreality 3D CR-10 3Dプリンター- 青 EUプラグCreality 3D CR-10 3Dプリンター- 青 EUプラグCreality 3D CR-10 3Dプリンター- 青 EUプラグCreality 3D CR-10 3Dプリンター- 青 EUプラグCreality 3D CR-10 3Dプリンター- 青 EUプラグ

推奨製品

カスタマーレビュー

4.74 5のうち
  • 276
  • 63
  • 2
  • 1
  • 5
すべてを見る347レビュー レビューを書く
  • Chris Durkin
    はい (5) 色: Blue サイズ: US Plug
    cdurkinz
    -Very good quality prints
    -Prints in most filaments
    -Everything is very high quality, heavy, metal, very skookam.
    -Chooches like the best of them!
    -Super quick and easy to assemble.
    -Some extra parts even
    -I've only just started but this seems to be one of the easier printers to upgrade quite a bit
    -Included micro-SD card has a couple prints on it already that are nice mods for the CR-10. Such as a couple strain reliefs and a guide, etc.

    Some incorrect things that GearBest answered when people have asked in the questions section, that I would like to clear up, I just hope those same people see this review.

    -It DOES come with a glass bed top ontop of the aluminum heated bed base.
    -It DOES come with a little PLA filament. It's not a ton but it's quite a bit to get you started, I've printed 4 or 5 things so far and I haven't even put a dent in it.
    -I believe the extruder in this is an MK8

    Finally on to shipping. I'm somewhat happy to say that this is the fastest I've ever received something from China. Usually things take 2-3 weeks or more but this arrived in 10 days from China to Central US (Northern IL). The one weird thing and I'm guessing something went wrong was that when I ordered it I chose expedited shipping, and DHL EXT. It was NOT clear what DHL EXT is or what half of the shipping options mean, but I can say that my package started in China using China Post and was delivered to my door using USPS, the entire time I had a USPS tracking number to track it.

    Now when I ordered and chose DHL EXT there was NO added shipping cost even though it said expedited, which I found interesting because I'm fairly certain expedited shipping from China would cost a few bucks. So I figure maybe this "DHL EXT" isn't for shipping to the US and so they just sent it through USPS. But I can't say for sure.
    提案
    -Not really a con but either it is tested before they ship it or I got one that someone returned and they fixed it or something.
    -Sticker on fan peeling off
    -A coupler's set-screws on the Y-axis stepper motor weren't affixed correctly, easy fix though so again not really a con. Plus I've read that some people have has those couplers snap in shipping so I figured this may have been done on purpose.

    The issue I had was when I went to tighten the set-screws they went all the way through and fell into the middle of the coupler. No big deal I had to loosen all the set screws and move things around to get them out and realized I had to move the coupler up a little bit for it to connect the Y-axis threaded pole and the stepper motor. Just an FYI

    Oct 04,2017

  • Daniele
    はい (2) 色: Blue サイズ: EU Plug
    Architetto
    La stampante CR-10 è una buona stampante che ha un ottimo rapporto prezzo-prestazione. E' facile da montare anche dai meno esperti; di fatto c'è da unire i due pezzi principali, stringere le viti e collegare i fili x, y, z nella giusta posizione e poi non resta che partire per la prima stampa di prova. Come “tradizione” NON STAMPATE il file g-code del Gatto... è corrotto e dopo due ore di stampa va fuori centro ed è tutto da buttare! Scaricate da internet uno dei tanti files di prova e provate con quelli; a me ha funzionato molto bene il Robot di Ultimaker.
    Per stampare in PLA non è necessario scaldare il piatto, occorre solo il nastro per dare aderenza. Occorre fare una buona calibrazione, che con un piatto di così grandi dimensioni non è semplicissima anche se, una volta fatta, viene mantenuta a lungo.
    Il problema maggiore nella calibrazione del piatto è che se vanno bene gli angoli al centro la testina di stampa o è troppo vicina e raschia la superficie o è troppo lontana e il layer non aderisce bene... Ciò è probabilmente dovuto al fatto che il piano in vetro non è perfettamente piano ma tende ad alzarsi o abbassarsi al centro. Consiglio quindi, dato che le stampe non saranno sempre alla massima dimensione, di calibrare il piatto sulla parte centrale più utilizzata per stampe con la base fino a 18x18 cm, ed utilizzare tutti i 40 cm di altezza.

    Consiglio questa stampante, soprattutto se è la vostra prima stampante 3D dove poter sperimentare ed imparare i trucchi per una buona stampa.
    提案
    E' poco curata la documentazione fornita. La scheda fornita dovrebbe avere un maggior numero di files STL di esempio ed alcuni GCODE perfetti con le indicazioni dei parametri di slicing in modo da fare subito delle prove e verifiche. Sarebbe necessario anche avere da subito CURA nella versione più aggiornata, senza dover andare a scaricarla da internet.

    Dec 05,2017

  • Fredrik Stahre
    はい (5) 色: Blue サイズ: EU Plug
    Software Engineer
    The printer works well and gives good prints. I'm new to 3D printing so I can't really compare to anything else except youtube clips from other printers. One thing I have notices is that the cat print (even though it didn't print the head) included gets printed in super awesome quality and prints I've gotten of Thingiverse and sliced with Cura does not reach that quality, I guess it has to do with settings in Cura and maybe the details of the 3D files. The quality is very nice anyway though, so no real complaint, just an observation. It takes some skills to do the right settings when slicing.

    My machine was not actually working ok when I first started it up. The temperature measurements were resetting randomly and resulted in Low Temp errors. I found that the problem is because the cable that goes to the to the nozzle, fans etc is glitchy, when I move the cable it looses connection. I've temporarily solved it by disassembling the connector on to the main unit and bent the cables a bit but it's not a long term solution. I will ask GearBest if the can send a new cable.

    Overall, for the price, this printer is very good so far and it was easy to assemble. If it hadn't been for that glitch in the cable it would have been super easy. Still, not recommended if you are looking for a Plug and Play experience, you need to watch some you tube vids, read some instructions and be ready to experiment a bit before you get nice prints.
    提案
    Bed levelling is a bit fiddly and I think it doesn't get exactly levelled. Mine is level in the corners but it's sagging down 0.1-0.2mm in the middle. I've solved it by levelling without tape in the corners and then printing on one layer of tape to get the middle part up 0.1 mm. I'm not sure how this will work for really big prints that goes all the way out to the edges though, the nozzle might come to close to the glass. I've yet to try any of the more advanced solutions with wedges under the bed. For now it works just fine with a layer of tape.

    Could use some more instructions on how to get started with setup and printing. How to get prints to stick to the bed and so on.

    Aug 04,2017

  • T (engineering student)
    はい (1) 色: Blue サイズ: US Plug Upgraded Version
    Just received 9/15/18
    Took about about 10 days to get from China to Northern California. Got the printer set-up and printing in about an hour. The settings on the cat file that comes on the SD aren't great, had to lower nozzle temp to 192 and raise bed temp to 60. Still working on first complete print (PSU box legs) and notice a lot of stringing, which is likely due to settings (retraction probably).

    Okay, quality control issues.1. Y-axis belt tensioner bracket was bent causing belt to ride on one side of the pulleys and twist. 2. Bracket holding y-axis stepper motor is bent and causing same issue as the other end. These are very simple things to fix, which will happen after the current print is done. 3. They did not debur and clean up the metal from the holes being drilled in the frame. Easy thing to clean up, but it probably shouldn't be there. 4. Glass bed is warped. Everyone already knows about this, and I'm sure they are aware. Hope they fix this sooner than later. 5. Hot end heat sink not screwed in on one side and is sitting cockeyed. Noticed it during current print, I think all it needs to be tightened down. I hope they didn't mess something up and then leave it like that. I'll update later.

    Packaging was A+ great. Box was not beat up in shipping. Instruction manual is good enough.

    For the price (compared to amazon/others) it seems like this is a great deal.

    Sep 16,2018

  • Creality CR-10S Unboxing and Setup
    はい (2) 色: Blue サイズ: EU Plug Upgraded Version
    Creality CR-10S Unboxing and Setup
    The Creality3D CR - 10S 3D Desktop DIY Printer was a very simple and easy to build 3D printer that has very good print results.
    Highly recommend if you are in the market for a 3D printer that is low budget with good quality print output.
    Building the printer was very easy from start to finish. Very little skill was needed as a lot of the build was already done.
    Unbelievable 3D printer. Well worth the money
    Very good quality prints
    Prints in most filaments
    Everything is very high quality
    Super quick and easy to assemble.
    Some extra parts even
    I've only just started but this seems to be one of the easier printers to upgrade quite a bit
    Included micro-SD card has a couple prints on it already that are nice mods for the CR-10. Such as a couple strain reliefs and a guide, etc.
    Check out my unboxing and build video
    https://www.youtube.com/watch?v=jDU3mpXYGyc&t=33s
    提案
    A few loose bolts found on the assembled parts so check when you are building yours. These may have been left loose for transport.
    At this time there are no real cons as every thing was easily assembled and worked perfect from the start

    Jun 25,2018

お客様の質問

  • すべて
  • 製品情報
  • 在庫状況
  • 支払い
  • 発送について
  • その他

最初の質問をしてください。 Gポイントが必要ですか? レビューを書いてください!

0の質問と回答 すべてを見る

このアイテムに関連するスポンサー製品

Creality CR - 10 をまとめ買いしますか? Creality CR - 10 のお問い合わせを以下に送信してください。通常、 Creality CR - 10 の注文で送料無料を提供することはありませんが、卸売価格は非常にお買い得です。

最近表示したアイテム

パーソナライズされた推奨事項を見る

新規顧客ですか? ここで始める
先行販売サービス